Cart: 0 item(s) - £0.00
Office: +44 (0)114 324 1224
Mobile: +44 (0)7891 600 331
You can call us on telephone 0114 324 1224 to check any details before purchasing.

90 Litre V-Flap Bag

90 Litre V-Flap Bag

750 x 350 x 350 mm High

300kg SWL

Product Code : VFLB 90L PB PWS
Connector Options
Base Options
Send to a friend

Originally designed to take a tool box up to height safely, this lifting bag has a very low height to the Bearing Point so is ideal for hoisting over guard rails and through small portals.

It has a double Velcro Flap fastening system at the top to provide weather resistance, additional load security and compliance with Environmental Protection Regulations.

The polyester lifting sling, complying to EN1492-1, is secured in a 'basket hitch' through the fabric of the bag to provide industrial grade strength whilst supporting the load appropriately for formal lifting purposes. 

The PafBag Ring-Sling system allows the Lifting Sling to stretch and take the strain without damaging the bag, whilst it greatly increases excellent side wall strength across the seams when lifting heavy loads.

A 5mm thick, HDPE base plate inside the bag directs the forces onto the lifting sling whilst protecting the bag and sling from sharp contents.  Each of the two side walls are stiffened with plastic plates to add further protection and maintain the bag's shape when loading and lifting.

The two handles at each end enable the bag to be guided around obstacles, lifted over guard rails, and then carried by one or two persons along gantries and through doorways.

A 5mm thick, tough HDPE tray bolted to the underside of the bag provides excellent external wear resistance for heavy usage in tough environments.

There are two Lifting Point options for this bag, which can be selected above.

Delta Rings rated at 2750Kg Breaking Load each provide easily identifiable lifting points. 

Lifting-Point wear-sleeves. Tubular webbing installed around the slings at the lifting point as expected in formal lifts.

Unusually in this range of V-Flap Bags, there are two options for how this bag is finished off at the base:

Protective Boot made from the same material as the bag and fixed in place with strong Velcro tabs. This boot forms a cheaper method of protecting both the lifting sling and the base of the bag from scuffs and scrapes in light industrial conditions.

Hard Tray Base: A 5mm thick, tough HDPE tray bolted to the underside of the bag provides excellent external wear resistance, even on highly abrasive surfaces like concrete and expanded metal gantries.

Choose your two options above and add your lifting bag to the shopping cart.